Skip to content
Get a quote
Powder coating Shot blasting Aluminium powder coating Wheel refurbishment
Call us: 881 420 900

Aluminium powder coating

Powder coating of aluminium

We chemically pre-treat aluminium profiles, sheets, castings and facade elements in a six-stage immersion line prior to powder coating.

Aluminium requires a different pre-treatment process from steel. Instead of abrasive blasting, we use chemical immersion: an acid degreasing and etching bath, two rinses, zirconium passivation, a further rinse and a final rinse in demineralised water. Bath concentrations and pH levels are monitored regularly.

Zirconium passivation forms a thin nanoceramic conversion layer on the aluminium surface, significantly improving paint adhesion and resistance to filiform and underfilm corrosion.

Aluminium pre-treatment

Six treatment baths before coating

We pre-treat aluminium chemically by immersion: acid degreasing and etching, rinsing, zirconium passivation and a final rinse in demineralised water. We closely monitor the parameters of every bath.

  1. Product
    Alfideox 83
    Temperature
    30–35 °C
    Time
    5–15 min
    Parameters and control
    Acid bath, concentration controlled by titration. Working concentration min. 20 g/l (2%).
  2. Product
    Mains water
    Temperature
    ambient
    Time
    1–2 min
  3. Product
    Mains water
    Temperature
    ambient
    Time
    1–2 min
  4. Product
    Ferropas 7815
    Temperature
    ambient
    Time
    0.5–2 min
    Parameters and control
    Concentration and pH control. Working concentration min. 3–4 g/l (0.3–0.4%), bath pH 3–4.
  5. Product
    Mains water
    Temperature
    ambient
    Time
    1–2 min
  6. Product
    DEMI water
    Temperature
    ambient
    Time
    1–2 min
    Parameters and control
    Conductivity max. 30 µS/cm.

How we work

Six steps to a durable finish

  1. We agree on the colour, finish, quantity and lead time. Collection and delivery are available on request.

  2. Steel is shot blasted to Sa 2–Sa 3; aluminium undergoes a six-stage immersion process with zirconium passivation.

  3. An electrostatic spray gun applies charged powder particles to the earthed workpiece — reaching corners and recesses evenly.

  4. Inside the curing oven at 150 to 230 °C, the powder melts and cross-links into a uniform, durable coating.

  5. We inspect surface appearance, coating thickness and adhesion — using the EN ISO 2409 cross-cut test.

  6. Finished parts are packed for collection or delivered directly to your address.

Projects

Fresh from our oven

Quote

Have parts to coat? We will quote them.

Send us a photo or technical drawing along with dimensions, quantity and colour. We will get back to you with a quote and lead time.

All services

Workpiece (optional)

or call: 881 420 900

Call us Get a quote